Catalogue measurements are references. A backrest, handle or outstanding disassembly decision may change what you need to describe.
Measure the item you will move, rather than a similar catalogue image. If a sofa has projecting arms or a wardrobe has a cornice, those parts remain in the description while travelling assembled. The name ‘three-seater sofa’ does not give universal dimensions.
The measurement helps calculate geometric volume and explain the object. The company must review packing, transport method and access. Do not try to dismantle an item just to match an example or opening measurement.

Before using the tape measure
- Identify the object with a name you will also use in photos and the list.
- Decide whether you are describing the whole item or already separated parts.
- Choose a unit and write it with every measurement.
- Separate checked measurements from those you cannot obtain safely.
Measure only accessible sections without moving furniture into a dangerous position. Mark approximate dimensions and leave unchecked ones outstanding.
The sofa: whole-item dimensions
To describe a whole sofa, find the outermost points defining length, depth and height. Mark projecting elements and whether any component is already separate. A side photo can explain the backrest; an overview identifies what you measured. Do not infer from these that the object fits a staircase.
Example with assumed dimensions: a sofa of 210 × 95 × 90 cm equals 2.10 × 0.95 × 0.90 m. Its geometric volume is 1.7955 m³. This is not a typical sofa size or necessarily the space it will occupy packed.
If the company proposes removing a component for transport, ask how the item will be identified and which tasks are included. Until that decision is confirmed, do not replace complete measurements with ones dependent on unassessed dismantling.
The wardrobe: assembled and in parts are two descriptions
A wardrobe may stay in the home while its contents travel. It may travel assembled or need assessment for dismantling. Establish your case first. Do not add furniture staying behind to the transport inventory, and avoid counting the same contents as loose objects and inside boxes.
| Situation | What to record | What is still outstanding |
|---|---|---|
| The wardrobe stays | Only packages of its contents that will travel | Quantities of unsealed boxes |
| Travels assembled | Dimensions of the whole item | Access and preparation method |
| Already divided into packages | Dimensions and quantity of each package | Identification and assembly at destination |
| Dismantling undecided | Whole item and inspection note | Feasibility, tasks and new measurements |
When describing packages, each needs a reference linking it to the furniture. If grouping identical pieces, check their dimensions really match. Do not also record the whole wardrobe as another transported object, as this would add both representations together.
The unit changes the figure
Convert centimetres to metres by dividing each dimension by one hundred. Do not divide the result of multiplying three centimetre measurements by one hundred: that divisor does not convert cubic centimetres to cubic metres. To avoid errors, first write measurements in metres, then multiply.
| Example measurement | In metres | Calculation |
|---|---|---|
| 210 cm | 2.10 m | 210 ÷ 100 |
| 95 cm | 0.95 m | 95 ÷ 100 |
| 90 cm | 0.90 m | 90 ÷ 100 |
| Example sofa | 1.7955 m³ | 2.10 × 0.95 × 0.90 |
Check the dimension order in the tool. Keeping length, width and height consistent helps spot a wrongly transcribed entry and compare it with your notes. Precision in the final figure does not compensate for an outstanding measurement or an item recorded twice.
A record to show the company
Keep the name, quantity, dimensions, unit and transport state. Add a brief note if a part protrudes, the item needs inspection or you cannot yet measure it. The photo should explain the object; try to exclude documents, faces or access details you do not need to share.
In the inventory you can change catalogue dimensions and add your own objects. Check each measurement; when assessing the move, the company must also review access and the tasks you need.
If the company obtains a different measurement, compare it with yours, stating which outer points you used and the item's state. It may be describing a package prepared for transport while you describe unpacked furniture. Ask for that difference to remain visible in the list used for the proposal.